Filter Results By:
Products
Applications
Manufacturers
Trainers
A course of instruction to raise proficiency.
-
product
Man-Portable Aircraft Survivability Trainer
MAST™
The Man-Portable Aircraft Survivability Trainer (MAST™) is a long-range ultraviolet (UV) stimulator capable of testing aircraft electro-optical (EO) sensor suites up to 5 km (3.1 mi). Designed to operate as a pilot training tool, MAST comes equipped with day/night video recording and precision GPS instrumentation for after-action review of simulated engagements.
-
product
Differential Pressure Transmitter Trainer
Unitech Scales And Measurements Pvt. Ltd
This table top model comprises of two pressure chambers. One for high pressure and another for low pressure. The two pressure chambers are fitted with pressure gauges. The differential pressure transmitter is connected to the two chambers. The pressure is built by a foot air pump. Digital instrument is provided to indicate the differential pressure with transmitter output.
-
product
Basic Communication Trainer
Basic Communication Trainer System to understand Digital & Analog Modulation & Demodulation Techniques. Various functional block diagrams are provided on-board for Teaching/Training. This Trainer provideswith various Test Points to visualize the signals on Oscilloscope.
-
product
Basic Electronics Trainer
Basic Electronics Trainer System to understand Characteristics of Variuos Type of Electronic Components.Functional block diagrams are provided on-board for Teaching/Training. These Trainer provides with various Test Points to Measure the Parameters on Multimeter.
-
product
Boundary Scan Trainer Kit
QE49
Qmax Test Technologies Pvt. Ltd.
The QE-49 IEEE1149.1 Boundary Scan Trainer Kit was developed by Qmax to provide user a good understanding and hands on the testing principals of boundary scan namely the scan chain test, interconnect test, non-BS functional testing of logic IC and cluster like a combinational or sequential circuits.
-
product
Viabration Measurement Trainer Module
Unitech Scales And Measurements Pvt. Ltd
Vibration Measurement Trainer comprises of vibration generator of capacity 5 Newton with vibration exciter. Piezoelectric accelerometer is used to sense the vibration. Digital display unit will display displacement, velocity & acceleration sensed by the sensor.
-
product
Rotameter Measurement Trainer Module
Unitech Scales And Measurements Pvt. Ltd
The setup is a table top module, it comprises of source and measuring tank. The measuring tank is made of acrylic material with gradation marked in liters. A small FHP pump is fitted to circulate the water. A rotameter with control valve is used to measure the flow rate. Digital timer is provided to note down the duration of flow and the volume of water is measured by the markings on the measuring tank to calculate the actual flow rate
-
product
Strain Measurement Trainer Module
Unitech Scales And Measurements Pvt. Ltd
Strain Measurement Module comprises of Cantilever Beam bonded with four strain gauges,pan and weights upto 1Kg. Digital 3½ digit indicator module is supplied to read the microstrain.
-
product
Basic Pneumatic Trainer
Unitech Scales And Measurements Pvt. Ltd
It consists of a basic pneumatics kit components for, FRL unit solenoid valve, cylinder etc. This basic pneumatics kit shall be capable of being used to demonstrate to the design, construction and circuits.
-
product
Microprocessor & Microcontroller Trainer
8085/8086 Microprocessor based product designed to teach students about 8085/8086 architecture and its programming techniques & provides a very simple and user friendly platform for students so they can learn about 8085/8086 Microprocessor architecture and implement their own ideas with different peripherals provided on board. Practical experience on this board carries great educational value for science and engineering students.
-
product
Pressure To Current Measurement Trainer
Unitech Scales And Measurements Pvt. Ltd
Pressure to Current (P to I ) Trainer:This setup comprises of pressure chamber fitted on a base board. A pressure transducer and bourdon pressure gauge are fitted to the chamber. Digital pressure indicator with transmitter output is provided to display the pressure sensor by the pressure transducer. Transmitter output 4 to 20mA can be measured by a current meter. Foot air pump is provided to build the pressure.
-
product
Boundry Scan Testers
Qmax Test Technologies Pvt. Ltd.
Boundary Scan Trainer Kit was developed by Qmax to provide user a good understanding and hands on the testing principals of boundary scan namely the scan chain test, interconnect test, non-BS functional testing of logic IC and cluster like a combinational or sequential circuits.
-
product
Level Measurement Trainer Module
Unitech Scales And Measurements Pvt. Ltd
Level trainer is a table top module, it comprises of measuring tank of 50 CM length, sump tank and load cell capacitance as level sensor. A vertical pump is fitted circulate the water. Digital display indicator is provided display water level in cm
-
product
Speed Measurement Trainer Module
Unitech Scales And Measurements Pvt. Ltd
Speed Measurement Trainer comprises of photo reflective & magnetic pickup sensors, fractional HP cc.
-
product
Microwave Communication Trainer
We are instrumental in offering quality range ofMicrowave Products that finds application in satellite communication, broadcast and educational centers. Our range includes microwave test bench, critical microwave band & joint and MIC trainer. These products are known for optimum performance and high efficiency.
-
product
Air
Here at BAE Systems Air, we have a long and proud heritage in the development, manufacture upgrade and support of world-leading combat and fast jet trainer aircraft.
-
product
Advanced Digital Lab Trainer
Designed to do experimentation with Digital & Analog circuits in the laboratory. It is a self contained trainer including Fixed & Variable DC Power Supplies, Pulse Generator with TTL/CMOS, Pulsar switches, etc In a single unit. It is very useful in project work and testing. A number of ready to use experiment circuits boards are available(Optional).
-
product
3D Guidance®
The 3D Guidance® electromagnetic tracking solution delivers exceptional performance and value for OEM image-guided interventional and therapy systems and medical trainers that require real-time navigation tracking capabilities. The 3D Guidance solution tracks 6DOF sensors that can be embedded into OEM instruments such as ultrasound probes, rigid and flexible scopes, and laparoscopic tools. Continuous in-vivo tracking is maintained through difficult anatomy, even when sensors are out of sight. Low latency and fast update rates ensure the most subtle tool movements are instantly tracked and visualized within the OEM host interface. The 3D Guidance solution is available in the driveBAY™ and trakSTAR™ configurations, as based on the Electronics Unit. The trakSTAR is a standalone desktop unit that connects to a direct power source. The smaller driveBAY fits inside the drive bay of a computer, OEM imaging cart, or medical trainer/simulator, using the host’s power supply. Both share the same tracking accuracy and reliability. The ready-to-use configuration facilitates cost-effective integration and speeds time to market.
-
product
DSP Trainer
Digital Signal Processing is a technique that converts signals from real world sources (usually in analog form) into digital data that can then be analyzed. Analysis is performed in digital form because once a signal has been reduced to numbers; its components can be isolated, analyzed and rearranged more easily than in analog form. Digital Signal Processing (DSP) applications are becoming more prevalent in everyday use. Because of this widespread usage and advances in computer technology, the DSP algorithms themselves are being subjected to more demanding specifications. There is a constant need for designing systems with lower power, higher speed and less space and to achieve this we are developing new algorithms, techniques.
-
product
Visual Server
ImaGen
ImaGen is the ideal platform for demanding simulation applications such as flight and driving trainers. With ImaGen, developers can quickly and easy integrate the latest graphics technology into their training systems.
-
product
Flow Measurement Trainer Using Orifice Meter
Unitech Scales And Measurements Pvt. Ltd
This setup is a table top model, it comprises of source and measuring tank. The measuring tank is of acrylic with liters graduated. A small FHP pump is fitted to circulate the water. A orifice meter with U-tube manometer is provided to measure the flow rate. A rotameter is provided to measure the exact flow rate. Control valve is provided to control the water flow rate. Digital timer is provided to notedown the duration of flow.
-
product
Pressure Measurement Trainer Module
Unitech Scales And Measurements Pvt. Ltd
Pressure Measurement Trainer comprises of strain gauge based pressure cell, foot pump to build the pressure, pressure tank fitted with release valves and a bourdon pressure gauge. Digital pressure indictor to read the pressure in Kg / Cm² is provided.
-
product
Digital Communication Trainer
Digital Communication Trainer System to understand Techniques of Digital Modulation & Demodulation.Various functional block diagrams are provided on-board for Teaching/Training. These Trainer provides with various Test Points to visualize the signals on Oscilloscopes.
-
product
Semiconductor Wafer Defect Inspection Management Software
ProcessGuard
Microtronic ProcessGUARD Software is the desktop client for the EagleView auto macro wafer defect inspection system. ProcessGUARD is a high volume, high speed semiconductor wafer defect inspection management solution that provides an easy-to-use, customizable and extensible platform and interface to automate your fabs defect inspection process. ProcessGUARD is feature rich (see below) and its newest releases include complete wafer randomization software, a user-defined defect library, and an integrated trainer and knowledge base.
-
product
Light Dependant Resistance Measurement Trainer
Unitech Scales And Measurements Pvt. Ltd
L.D.R. Trainer comprises of light dependent resistor (LDR) fitted to the shaft, which moves inside the tube where lamp is fitted at the other end. Variable DC voltage source is provided to vary the light intensity. Digital indicator is supplied to measure the light intensity in terms of distance moved between LDR and light source.
-
product
Piezo-Electric Measurement Trainer Module
Unitech Scales And Measurements Pvt. Ltd
PiezoElectric Trainer comprises of piezoelectric crystal mounted inside housing and fitted on a base plate. Digital indicator is supplied to indicate the vibrational force.
-
product
Capacitance Measurement Trainer Module
Unitech Scales And Measurements Pvt. Ltd
Capacitance Trainer comprises of parallel plate/angular capacitor with dielectric medium air as sensor, mounted on the base plate with scale for displacement. Digital indicator is provided to read the change in capacitance in terms of displacement.
-
product
Inductance Measurement Trainer Module
Unitech Scales And Measurements Pvt. Ltd
Inductance Trainer comprises of a coil wound on a bobbin in which a magnetic material core moves as sensor. The displacement of the core is measured and displayed through a digital indicator.
-
product
Venturi Flow Measurement Trainer (UITM-22)
Unitech Scales And Measurements Pvt. Ltd
UNITECHS venturi flow measurement trainer comprises of an Venturi meter fitted between the piping. A small FHP pump is used to circulate the water through the piping. Pressure ports brought out from the Venturi meter are connected to a U tube mercury manometer to measure the pressure difference. Collecting tank of capacity 5 liter is provided with graduations to measure water level. Digital timer is fixed to calculate the flow rate. Flow can be controlled using a manual control valve. The complete setup is mounted on a table top model.
-
product
Bourdon Guage Trainer Module
Unitech Scales And Measurements Pvt. Ltd
Bourdon Gauge Trainer comprises of bourdon pressure gauge fitted on a pressure chamber, a displacement sensor is attached to the edge of the bourdon tube to sense the deflection of the bourdon tube due to pressure. The displacement indicator is provided to measure the deflection of the tube in terms of pressure and also in mm.
