Filter Results By:
Products
Applications
Manufacturers
Scanning Electron Microscopy
surface imaging from 1 to 5 nm in size.
See Also: Scanning Electron Microscopes, SEM
- Kreon Technologies
-
product
TEM Lamella Preparation And Volume Imaging Under Cryogenic Conditions
ZEISS Correlative Cryo Workflow
ZEISS Correlative Cryo Workflow connects widefield, laser scanning, and focused ion beam scanning electron microscopy in a seamless and easy-to-use procedure. The solution provides hardware and software optimized for the needs of correlative cryogenic workflows, from localization of fluorescent macromolecules to high-contrast volume imaging and on-grid lamella thinning for cryo electron tomography.
-
product
Analytical Services
IGC: Inverse Gas Chromatography; Understand surface energies, polarities, acid/base properties and nanomorphology on powders and fibers. ToF-SIMS: Time-of-Flight Secondary Ion Mass Spectrometry. Localize your molecules at the first nanos! 2D imaging with resolution up to 200 nm. Highest sensitivity up to 10 ppm. CM: Quarz Crystal Microbalance In-situ observation of thickness and stiffness of any films in liquid environmentSEM: Scanning Electron Microscopy Images say more than words, especially with an artistic eye XPS/ESCA: X-ray Photoelectron Spectroscopy/Electron Spectroscopy for Chemical Analysis.
-
product
Cross Sections and Metallography
Rocky Mountain Laboratories, Inc.
Cross sections are prepared by mounting samples in epoxy and then grinding and polishing the mount for imaging in the optical microscope or Scanning Electron Microscopy (SEM). Valuable information from cross sectioning can include: film thicknesses, inclusions, corrosion thickness, dimensional verification, and subsurface defects. Metallographic cross sections are typically etched to reveal the microstructure. Microstructural analysis can provide information about heat treatment history, corrosion susceptibility, as well as undesirable microconstituents.
-
product
Scanning Electron Microscopy
SEM
Materials Evaluation and Engineering
JEOL JSM-6610 LV LaboratoryScanning electron microscopy (SEM) uses electrons for imaging to obtain higher magnifications and greater depth of field than light microscopes. The instruments at MEE are capable of variable-pressure, or low vacuum, SEM (VPSEM), as well as traditional high-vacuum conditions for sample observation. VPSEM is a specialized method using a variable-pressure sample chamber that allows direct evaluation of samples that are not readily examined with a traditional high-vacuum SEM. Nonconductive or vacuum sensitive samples that would typically require additional sample preparation can be directly analyzed in VPSEM without the need for additional sample preparation, such as carbon or metallic conductive coatings. This reduces both sample preparation time and distractions in microanalysis. Our laboratory also has a field emission SEM (FESEM) for critical high-magnification work and low-voltage (LVSEM) applications. Each instrument has a spacious sample chamber that can accommodate large and irregularly-shaped specimens and accessories for feature dimensional analysis and chemical microanalysis.
-
product
Semiconductor
Aerotech has a long history of engineering and manufacturing motion systems and components for high precision wafer processing, scanning electron microscopy (SEM), wafer bumping, 450 mm wafer manufacturing, lithography equipment and advanced laser micromachining. We also specialize in systems and components for vacuum applications, such as EUV lithography. So whether you need off-the-shelf wafer bumping components or a custom-engineered SEM system manufactured and tested to exacting specifications, Aerotech can provide the optimal solution for your application.
-
product
X-Ray Photoelectron Spectrometer
AXIS Supra
AXIS SupraTM is an X-ray photoelectron spectrometer (XPS) with unrivalled automation and ease of use for materials surface characterisation. The patented AXIS technology ensures high electron collection efficiency in spectroscopy mode and low aberrations at high magnifications in parallel imaging mode. XPS spectroscopy and imaging results can be complemented by additional surface analysis techniques such as: ultraviolet photoemission spectroscopy (UPS); Schottky field emission scanning Auger microscopy (SAM) and secondary electron microscopy (SEM) and ion scattering spectroscopy (ISS). The AXIS Supra replaces the AXIS Ultra DLD as Kratos' flagship x-ray photoelectron spectrometer.
-
product
Scanning Electron Microscopy (SEM Analysis)
Rocky Mountain Laboratories, Inc.
Scanning Electron Microscopy (SEM Analysis) can produce images of almost any sample at magnifications of 15-300,000X. The SEM has tremendous depth of field allowing for imaging that cannot be accomplished using optical microscopy. Conductive and nonconductive samples can be imaged. When operated in the backscatter (BSE) detection mode, differences in material composition can be observed. Elemental analysis can be performed on any feature observed with an integrated Energy Dispersive Spectroscopy (EDS) detector.
-
product
Sputter Coater & Freeze Fracture Solutions
To obtain high-quality images of samples with scanning (SEM) or transmission electron microscopy (TEM), your samples need to be conductive to avoid charging. If a sample does not have a high enough conductivity, then you can quickly cover it with a conductive layer using the method of sputter coating. Also, a carbon or e-beam evaporator coating can be used. Such coatings protect the sample, allow enhancing of the EM image contrast, or can act as a TEM-grid support film for small scale samples.
-
product
Microscopy
Microscopy is the technical field of using microscopes to view objects and areas of objects that cannot be seen with the naked eye. There are three well-known branches of microscopy: optical, electron, and scanning probe microscopy, along with the emerging field of X-ray microscopy.
-
product
Scanning Electron Microscope
Verios G4 XHR SEM
The Thermo Scientific™ Verios G4 scanning electron microscope (SEM) provides sub-nanometer resolution from 1 to 30 kV and enhanced contrast needed for precise measurements on materials in advanced semiconductor manufacturing and materials science applications, without compromising the high throughput, analytical capabilities, sample flexibility and ease of traditional Scanning Electron Microscope (SEM).
-
product
Scanning Electron Microscopes
Our Scanning Electron Microscopes (SEMs) resolve features from the optical regime down to the sub-nanometer length scale.
-
product
Scanning Electron Microscopes
SEM
Scanning Electron Microscopes (SEM) scan a sample with a focused electron beam and obtain images with information about the samples’ topography and composition.
-
product
Cathodoluminescence Solutions for Electron Microscopy
CLUE Series
HORIBA Scientific's Cathodoluminescence Universal Extension enhances any SEM’s analytical capabilities while maintaining its original functionality. Since the sample is able to remain in the same spot, CLUE can easily be combined with other microscopy applications, such as EDS and EBIC.
-
product
Scanning Electron Microscope
SEM
Delivers the world's best resolution with the incorporation of the newly-developed, super-high resolution Gentle Beam (GBSH). In addition, the maximum probe current of the In-lens Schottky Plus gun has been increased from 200 nA to 500 nA.
-
product
Scanning Electron Microscope
E5620
The E5620 is a MASK DR-SEM(∗) product for reviewing and classifying ultra-small defects in photomasks and mask blanks. It implements Advantest’s highly stable image capture technology to easily import defect location data from mask inspection systems and automatically image the locations. Compared to the E5610, our predecessor DR-SEM system, the E5620 features a number of improvements designed specifically to target mask requirements for extreme ultraviolet (EUV) lithography.
-
product
Real-Time X-Ray Imaging and Variable Pressure Scanning Electron Microscope
Trialon has the equipment and experienced staff to operate this highly technical piece of laboratory equipment. Our state-of-the-art materials analysis lab located in Auburn Hills, MI is managed by a Ph.D with over 20 years of hands-on experience in root cause failure analysis of design, material and process for current and future products.
-
product
Microscopy and Automation Solutions
Opto already offers automated multifluorescence microscopes for cell analysis, inverted autofocus microscopes for motion analysis of growth processes, and high- throughput fluorescence microscopes for DNA and RNA sequencing.
-
product
Light Microscopy
Materials Evaluation and Engineering
MEE has a variety of light microscopes with magnifications ranging from 5X to 2400X. Each microscope is connected to a camera with digital image capture for subsequent measurements and/or additional image analyses.
-
product
Electron Microscope Analyzer
QUANTAX EDS for TEM
Long standing expertise in EDS ensures the configuration of the best solution for your specific microscope (STEM, TEM or SEM) thanks to slim-line detector design and geometrical optimization for each microscope pole piece and EDS flange type
-
product
Correlative Microscopy
Our modular software platforms enable you to acquire, process and analyze images in multiple dimensions and over various timepoints
-
product
Microscopy Software
Our modular software platforms enable you to acquire, process and analyze images in multiple dimensions and over various timepoints
-
product
Electron Microscope Analyzer
QUANTAX WDS
The QUANTAX WDS (WDX) for SEM consists of the XSense wavelength dispersive spectrometer yielding the best resolution among all parallel-beam WDS systems.
-
product
X-ray Microscopy
Xradia Family
✔ Characterize the properties and behaviors of your materials non-destructively.✔ Reveal details of microstructures in three dimensions (3D).✔ Develop and confirm models or visualize structural details.✔ Achieve high contrast and submicron resolution imaging even for relatively large samples.
-
product
Scanning Acoustic Microscope
Pulse2
This industry-leading scanning acoustic microscope provides a universal inspection tool for packaged semiconductor development, production and failure analysis. With the ability to detect air defects as thin 0.05 micron and spatially resolve defects down to 10 microns, the ECHO is perfect for bump detection, stacked die (3D packaging) inspection, complex flip chip inspection and more traditional plastic packages.
-
product
Electron Microscope Analyzer
QUANTAX EBSD
QUANTAX EBSD system, with its popular OPTIMUS 2 detector head, is the best available solution for analyzing nanomaterials in the SEM
-
product
Electron Sources
SPECS Surface Nano Analysis GmbH
To our customers in research and industry we offer a variety of sources for deposition, excitation and charge neutralization as well as analyzers and monochromators. Most of our sources originate from product lines which we have taken over from Leybold AG, Cologne, and from VSI GmbH. The X-ray monochromator Focus 500 and the UV monochromator TMM 302 are original developments by SPECS.Compliance with industry standards, a good price-performance ratio, stability, and longevity are the guidelines for our product development. We focus on standardized easy handling, user-friendliness, standardized software interfaces and safety.
-
product
Electron Spin Resonance Spectrometer
ESR
Electron Spin Resonance (ESR) is a powerful analytical method to detect, analyze and determine thecharacteristics of unpaired electrons in a substance. It is clear that the state of electrons in a substance have a strong influence on its characteristics and functionality, so evaluation by ESR is becoming more and more important. Many types of substances, from electronic materials to catalysts, biological samples, can be studied regardless of whether they are solid, liquid, or gas. A wide range of ESR techniques are possible using suitable attachments together with the basic instrument.
-
product
Scanning Probes
3D Laser Scanning Probes for your existing CMM are options for full-time or part-time use. Laser Design’s broad range of scanning probes ensures a perfect fit between the scanner and the size and detailed features of your parts.
-
product
Analytical Software for Microscopy
SPIP
SPIP™ or Scanning Probe Image Processor - is an advanced software package for processing and analyzing microscopic images at nano- and microscale. It has been developed as a proprietary software by Image Metrology and is unique in the microscopy and microscale research market. With the high level of usable features, SPIP provides industrial and academic researchers with an advanced toolkit for working with microscope images, incl. extracting data from most microscopy file types, cleaning and enhancing data, analyzing measurements, visualizing and reporting analysis results. The software is used for research and innovation in a variety of industries such as pharmaceutical, cosmetics, semiconductors, hard disk manufacturing, polymer and aluminum manufacturing. Furthermore, SPIP is widely recognized as the standard microscope image analysis software for research and education at leading universities, and has been cited in more than 1200 scientific publications.
-
product
Laser Scanning Microscopes
A confocal laser scanning microscope scans a sample sequentially point by point, or multiple points at once. The pixel information is assembled into an image. As a result you acquire optical sections with high contrast and high resolution in x, y and z .
