Filter Results By:
Products
Applications
Manufacturers
Thermal Chucks
control DUT's thermal state. Wafer
See Also: Temperature Forcing Systems, Wafer Probers, Temperature Chucks
- Pickering Interfaces Inc.
product
PXI 23 Channel Low Thermal MUX
40-620-022
Pickering 40-620 Multiplexer modules are similar to other Pickering Multiplexer cards except thermal EMF is substantially reduced to <1.5V with 250nV thermal stability. Typical applications include signal routing in ATE, selecting thermocouple inputs, switching amplifier gain circuits and high accuracy DC microvolt measurements.
-
product
Chamber/Pyroelectric Task
Radiant's Chamber/Pyroelectric Task sets the sample to a series of temperatures by performingGPIB control of an external thermal device. At each temperature it captures the sample’s polarization response and/or small-signalcapacitance. These are combined to calculate the pyroelectric coefficient. The Pyroelectric Task is to be used with a Radiant Test System and a Linkam Stage (-196C to 600C), Thermal Chambers, Hot Chucks, or a Furnace to automatically measure the Pulse Polarization response and Small Signal Capacitance of a Pyroelectric material that is being heated and/or cooled. Radiant's Pyroelectric measurement Task can be added to Vision at additional cost. This measurement suite fully characterizes the pyroelectric charge (polarization) response of the sample under test. The Pyroelectric Task suite controls various thermal controllers such as Quantum Design, Lake Shore, Delta Design, and many others. Detailed Listing of Thermal Controllers Registered in Vision. The Chamber/Pyroelectric Task is quoted upon request.
-
product
Thermal Controlled Chucks & Plates
TOP Cool
Mechanical Devices newest innovation in thermal testing. Each TP system contains a thermal chuck or thermal plate and a self-contained thermal control unit.The TP chuck and platforms is a breakthrough product that introduced the use of refrigerant for active cooling & heating of wafers and other components with no need of chiller, CDA, or consumable and expensive refrigerants such as liquid nitrogen and liquid carbon dioxide. It can be a perfect replacement system in the industry for uncompromising thermal and mechanical performance with a temperature ranging from -60 to +220°C.
-
product
Thermal Chuck Systems
A-Series
Advanced Temperature Test Systems GmbH
The A-Series represents a productline of air cooled thermal chuck systems for a temperature range between -30C up to +400C. The basic product offers an active cooled chuck system without an external chiller for a temperature range between +25C up to +200C at a very competitive price to common Hot Chucks.
-
product
Probe Station
ETCP1000
Installation of “Hot and cool chuck” - Sellectable chuck size : 4inch, 6inch. - Temperature variation : -193°C ~ 300°C (80K ~ 573K) - Additional requirements : Vacuum chamber, LN2 tank(Bombei), microscope, CCD camera, manipulators. - EPS500 is standard model in ETCP1000 probe station.
-
product
On-Wafer Measurements
Accurate DC/CV (and RF) statistical modeling of semiconductor devices requires collecting a significant amount of measured data from different wafers across several temperatures. Keysight Technologies recommends IC-CAP WaferPro as a turn-key DC/CV and RF automated characterization solution to help modeling and device engineers achieve more efficient on-wafer measurements across temperature. This new breakthrough solution is based on IC-CAP modeling software and efficiently controls DC/CV analyzers, network analyzers, probers, switching matrixes, and temperature chucks, as well as the powerful 407x and 408x Series of Keysight parametric testers.
-
product
Thermal Chuck Systems
C-Series
Advanced Temperature Test Systems GmbH
Looking for a chuck system that gives you the possibility to cool down to - 60C and up to + 300C. The C-Series represents a product line of air cooled thermal chuck systems for a wide temperature range
-
product
Semi-Automatic Probe Station
P300A
The P300A probe station is the most stable, intuitive, and space efficient 300mm semi-automatic analytical probe station available today. Designed for low current, sub-micron positioning applications, the P300A comes standard with features such as single-point ground, dry/dark environment, and integrated thermal chuck plumbing.
-
product
Ambient Temperature Vacuum Wafer Chucks
6" (152mm) Vacuum Wafer Chuck for General Purpose Ambient Temperature testing with a Stainless Steel vacuum wafer surface
-
product
Vacuum Chuck Temperature Controlled Test Stations
These test stations offer the same reliable repeatable measurement capability of our temperature monitored stations with the added dimension of temperature control.
-
product
Pyroelectric and Thermal Testing
The optional Chamber Task measures the Pulse Polarization response and Small Signal Capacitance of a Pyroelectric material that is being heated and/or cooled within a thermal chamber, on a hot chuck or in a furnace. From these measurements the Spontaneous Polarization Pr(q) and the Dielectric Constant er(q) are computed. These are then combined to determine the Electrical Displacement D(q) as a function of the temperature q.
-
product
Wafer Chucks
American Probe & Technologies, Inc.
High Performance Chuck for your needs Introducing the American Probe & Technologies’ HC-6000 series of thermal chucks,
-
product
Thermal Chuck Systems
L-Series
Advanced Temperature Test Systems GmbH
The perfect system for high power applications with an extraordinary performance at a wide temperature range between - 65C and + 300C.Each system contains a high performant liquid-cooling unit.
-
product
Hot Chucks
Materials Development Corporation
Probe stations to suit all measurement requirementswhether production, engineering or research. See individual data sheets for more details.
-
product
Thermal Analysis
Improve accuracy, sensitivity, and performance in thermal analysis using our comprehensive portfolio of instruments. Our wide selection of precision designed accessories and consumables deliver the peace of mind that comes from knowing that you’ll get the results you need.
-
product
Thermal Profiler
V-M.O.L.E.®
The V-M.O.L.E. is a full-featured compact thermal profiler that belies its sophistication in an easy-to-use 3-channel Mini-thermocouple configuration. Ideal for VERIFICATION of PCB profile performance, 3 channels give you Hot, Cold and Sensitive component data for verifying the correct oven settings.
-
product
Thermal Enclosures
LDP
Bemco LDP Thermal Enclosures are always custom. They are environmental enclosures constructed using the techniques normally employed with Bemco's LDF Series of Wide Range Expendable Refrigerant, FL-I Series of Integral Walk-in, and FL-M Series of Modular Walk-in Chambers. The LDP enclosure illustrated at left has hinged stainless steel doors, with the protective paper still in place, and hinged sides to allow full interior access.
-
product
Thermal Management
Our air cooling components dissipating heat to the ambient air comprise high-performance heat sinks, general purpose DC fans and AC fans for forced air ventilation, as well as filter fans with exchangeable exhaust filter inserts that ensure clean and reliable air exchange in cabinets.
-
product
Thermal Tools
BMP Testing and Calibration Services Inc.
BMP Testing and Calibration Services, Inc. utilizes the latest thermal measurement equipment to analyze low to medium-conductivity materials, from ceramics, plastics, and polymers to coatings, composites, liquids, and building materials.
-
product
Wafer Chucks
ARC, in addition to fabricating Wafer Chucks from aluminum, is also known for its ability to work in hard to machine materials such as hardened (50-62 Rockwell) metal alloys, fired ceramics, e.g. SiC and glasses. These materials are often ideal for semiconductor equipment applications due to their ability to hold critical dimensions and tolerances. ARC specializes in surface grinding and lapping these materials to precision flatness and parallelism specifications needed for semiconductor wafer chuck requirements.
-
product
Fluids And Thermal
Whether you’re an analyst performing advanced computational fluid dynamics (CFD) modeling or a design engineer who quickly needs to understand fluid or thermal effects on a design proposal, Altair offers a complete line of tools to support your project. From detailed component analysis to full systems performance, Altair provides a range of scalable solvers under Altair CFD™, as well as robust pre- and post-processing software for CFD.
-
product
Drill Chuck Grips
Metal rods, wires, and plates and electronic components can be tensile tested using drill chuck grips. Electronic components are tested by placing the metal legs of the components in the grips, allowing different shaped components to be tested with the same set of grips.
-
product
Thermal Printer
DP-581H
It allows to print data without AC power by driven with built-in rechargeable battery, enables to use anywhere. Lithium-ion battery (6-cell, 11.1 V, 6000 mAh, 66.6 Wh)
-
product
Thermal Imaging
Is a sophisticated and non-invasive technique that utilizes infrared technology to detect heat emissions from various objects.
-
product
Thermal FETs
Pin-compatible with standard Power MOSFET packages and built-in over temperature protection function for body, lighting and heater applications, as well as powertrain applications and 24V battery system applications.
-
product
IR thermal imaging
JOHO260
Wuhan JOHO Technology Co., Ltd
JOHO260 is an outstanding light-weight IR thermal imaging surveillance system for helicopter, UAV, vessel, vehicle and any carriers. It is equipped with a mid-wave IR thermal camera, laser range finder for 24 hours continuous detecting and tracking air, sea and ground target via manual or auto model, it provides detection images and target relative position to control terminal.
-
product
Thermal Shock
Trialon routinely test products for the automotive, military, medical, aerospace, heavy truck and customer markets in our facilities in Michigan and Indiana.
-
product
Thermal Flow Splitter
FS-3000
FS-3000 combines HORIBA STEC’s mass flow controller (MFC) and MuCube (Master controller). By controlling MFC from MuCube equipped with the HORIBA STEC’s proprietary control algorithm, FS-3000 achieves stable splitting control.
-
product
Professional Thermal Camera
FLIR T540
Diagnose potential faults in industrial, electrical, and mechanical systems, or discover temperature anomalies in R&D testing with the 464 × 348 resolution FLIR T540. This portable, ergonomic thermal camera offers advanced features like 1-Touch Level/Span and continuous laser-assisted autofocus, making it the perfect non-contact diagnostic tool for condition monitoring and research applications. Streamline electrical/mechanical surveys, troubleshooting, and repairs with Inspection Route mode, which runs pre-planned routes created in FLIR Thermal Studio Pro (Route Creator plugin required) so users can record temperature data and imagery in a logical sequence. The built-in Macro Mode allows R&D users to quickly switch from wide angle to close-up analysis without changing the lens. When coupled with Research Studio software, the T540 helps engineers assess unexpected hot spots and find potential design flaws. The T540 also features FLIR Ignite for automatic uploading of images directly from the camera to the cloud for easy, secure storage and sharing. The purchase of a T540 camera includes a 3-month subscription to FLIR Thermal Studio Pro and FLIR Route Creator.
-
product
Thermal Data Logger
51101 Series
It is a general requirement to record temperatures, voltages, currents, and many physics quantities during research, product development, productions, and quality assurance processes. The number of record channels can be a simple one to several complicated set of hundreds. Thermal/multi-function data loggers are prefect solutions to serve for these measurement and tracking needs.
-
product
Thermal Imaging
JOHO272
Wuhan JOHO Technology Co., Ltd
With innovative design and superior functions, this thermal weapon sight sets a new standard to build in an eye-safe laser ranger finder which you can get target distance very easily. The thermal aiming and laser ranging scale line would be changing smaller as distance further so that the shooter would easily and quickly lock target even in a further distance. To improve shooting percentage, as many as ammunition drop chart can be input to the sight program. Should any drop chart be selected, the sight would automatically generate a new shooting scale line after program calculating temperature, angle, wind speed, altitude. Different button size and battery convex design friendly for shooter night us