Filter Results By:
Products
Applications
Manufacturers
- Taylor Dynamometer, Inc.
product
920 HP AC Chassis Dynamometer
TD-36-AC
Weight Capacity: 30,000 lb (13,608 kg) per axleRoll Brakes: Pneumatically-actuated discShipping Weight: 39,400 lb (17,872 kg)Capacity: 920 hp at 40 mph (686 kW at 64 kph)Rolls: 36 by 31 in. (915 by 787 mm) 4 fixed rolls to accommodate axle spreads from 48 to 74 in (1,219 to 1,880 mm) tandem centersPit Required Depth: 35 in. (889 mm)
-
product
Eddy Current Dynamometers
WT Dyno
Our WT series eddy current dynamometers are mainly used in the development and testing of all types of prime mover, as well as various engine assemblies. Due to their robust design, which incorporates improved control characteristics, they can be used both as steady state and as transient test stands.Their high speeds for automobile engine testing and their optimised cooling chamber, are convincing arguments that speak for themselves. All WT type dynamometers are suitable for operation in both directions of rotation.
-
product
Water Brake Chassis Dynamometers
Chassis water brake dynos (also known as hydraulic dynamometers) can be operated continuously to resolve overheating, fuel mileage and drivetrain issues. Taylor’s eight models accommodating 50 to 1,100 hp at 40 mph enable testing of single-axle diesel pickup trucks, RVs and buses up through the largest tandem-axle on-highway trucks and buses. Tap into our deep product and applications knowledge to help you choose and make the most of the right water brake system for current and future needs.
-
product
AC Engine Dynamometer
DA16HS
Power: 16 hp (11.9 kW)Torque: 42 lb-ft (56.9 Nm)Maximum Speed: 11,000 rpmConstant Torque Range: 0 - 2,000 rpmConstant Power Range: 2,000 - 3,200 rpmDecreasing Power Range: 3,200 - 11,000 rpmRotation: bi-directional
-
product
Dynamometer
I-Series
AW I-Series dynamometers are excellent for diesel engine testing as well as other applications. The electronic load control system on this hydraulic activated dynamometer allows for precise and steady control of Power and RPM levels.
-
-
product
Double-Roller Dynanometer
R 100/1 | VP 230002
Maschinenbau Haldenwang GmbH & Co. KG.
The double roller dynamometer R 100/1 with eddy current brake on the right side of the vehicle and pneumatic lifting beam is designed to measure the performance of cars and stands out due to its extremely robust, durable and low-maintenance construction. The R 100/1 ensures highest measuring accuracy due to the power measurement at a constant rpm, speed or tractive force, including the drag power measurement. Operating methods such as load simulation, including optional modules for the measurement of external data, are possible.
-
product
Power Monitoring Dynamometer
90085
Model 90085 is designed to measure machine tool output. This model acquires the necessary torque and speed data needed to calculate the horsepower of the machine tool under test conditions. It is a portable, self-contained data acquisition and monitoring system consisting of three major components: a pneumatic brake assembly, a torque and speed transducer, and the control and display module.
-
product
Towing Dynamometer
RSL-8K
RSL-8K Towing Dynamometer is designed for testing today’s mid-sized cars and compact SUVs. The RSL-8K is built with an all-aluminum frame, sheet metal body and rides on an independent, coil spring suspension. The RSL-8K uses an eddy current absorber for power absorption. The power is provided by batteries and an alternator.
-
product
AccuDyne™ AC Dynamometer Systems
SAKOR Technologies offers the AccuDyne™ series of AC motoring dynamometers. These 4-quadrant dynos offer full motoring as well as loading capabilities. AccuDyne dynamometers can be used for testing active components such as engines and electric motors as well as passive components such as transmissions, generators and alternators. AccuDyne dynamometers are available in models from 5 kW through 3 MW. SAKOR Technologies configures each AccuDyne system to meet customer-specific requirements.
-
product
PWC Dynamometers
Mount the DYNOmite absorber (and appropriate pump adapter) in place of the boat's standard nozzle and cone. Each pump adapter (sold separately) incorporates a shaft, driven by the impeller (without impeller removal). A load control valve (fed from your " garden hose) allows you to regulate RPM by varying absorber drag (while holding the throttle open). You can simulate running at any MPH from idle to top end. The DYNOmite's computer captures the engine's RPM from an (integral absorber mounted) magnetic RPM pickup. Torque readings come directly from a full-bridge (temperature- compensated) torque arm. Results are never estimated from vague hydraulic-pump pressures.
-
product
DynEDGE Controller
The DynEDGE controller offers an integrated, multi-loop control and data acquisition system in an off-the-shelf solution for dynamometer applications, including system modernizations, new installations, turnkey systems, and complete test cell control and data acquisition systems. The controller provides both speed and torque control with four control channels that can be configured for ±100 mA, ±10 V, and ±20 mA.
-
product
Engine Dynamometer
DE400
Power: 536 hp (400 kW)Torque: 1,475 lb-ft (2,000 Nm)Speed: 8,000 rpmWater Use*: 74 gpm (280.1 lpm)Inertia Value: 26 lb·ft2 (1.107 kg·m2)Shipping Weight: 4,012 lb (1,820 kg)Rotation: bi-directional*No Cooling System
-
product
Water Brake Engine Dynamometers
Hydraulic Dynos
Ideal for a wide range of markets, water brake engine dynamometers churn water inside the housing and transfers energy by momentum exchange and water shear. The more water flowing through the dyno, the greater the braking force exerted on the device under test.
-
product
Engine Dynamometer
DS48-HS
Power: 2,883 hp (2,149 kW)Torque: 9,500 lb-ft (12,880 Nm)Speed: 4,000 rpmWater Use*: 201 gpm (760.9 lpm)Inertia Value**: 231.6 lb·ft2 (9.8 kg·m2)Shipping Weight: 3,740 lb (1,696 kg)Rotation: bi-directional*No Cooling System** With Companion Flange or Torsional Coupling
-
product
Tractor PTO Dynamometers
All feature sophisticated data-acquisition electronics and powerful software packages at a price/performance ratio formerly unheard of for a professional PTO dyno.
-
product
Engine Dynamometer
DX3012
Power: 3,000 hp (2,237 kW)Torque: 9,651 lb-ft (13,085 Nm)Speed: 4,000 rpmWater Use*: 218 gpm (825.2 lpm)Inertia Value**: 239.1 lb·ft2 (10.1 kg·m2)Shipping Weight: 3,423 lb (1,553 kg)Rotation: bi-directional
-
product
Emission Measurement Systems
HORIBA develops and manufactures products and systems for testing of all types of engines: heavy-duty to small utility, onroad systems to non-road, marine to locomotive, automotive to aeronautic. Our extensive product line includes analyzers, analytical systems, dilution/ sampling systems, dynamometers and automation systems to assist engineers to evaluate and advance: exhaust gas and particulate emissions, engine performance, fuel economy, fuelcell reformer efficiency, other parameters of engine and vehicle.
-
product
1100 HP Water Brake Chassis Dynamometer
CM-51
AC power, air and water required at one side wallas applicable.• Room length, and pit location within length,must be determined by user to fit maximumtruck length and rear overhang.• Provide at least one man door for fire escapenear rear of room, but not in rear wall becausesomeone entering during a test could be struckby a stone flung from a tire. Provide ample fireextinguishers at each door and near driver.• “Back-on, Drive-off” installation configurationpreferred.
-
product
Engine Dynamometer
DS4012-HS
Power: 4,250 hp (3,169 kW)Torque: 14,250 lb-ft (19,320 Nm)Speed: 4,000 rpmWater Use*: 309 gpm (1,169.7 lpm)Inertia Value**: 350 lb·ft2 (14.7 kg·m2)Shipping Weight: 5,500 lb (2,495 kg)Rotation: bi-directional*No Cooling System** With Companion Flange or Torsional Coupling
-
product
Engine Dynamometer
DH21
Power: 270 hp (205 kW)Torque: 425 lb-ft (576 Nm)Speed: 5,500 rpmWater Use*: 20 gpm (75.7 lpm)Inertia Value: 3.4 lb·ft2 (0.143 kg·m2)Shipping Weight: 325 lb (147 kg)*No Cooling System
-
product
Containerized Dynamometer Systems
The Fully Contained Transportable (FCT) Dynamometer Series uses specially engineered shipping containers as a mobile testing facility for engine or transmission testing.
-
product
1100 HP Water Brake Chassis Dynamometer
TD-24
AC power, air and water required at one side wallas applicable.• Room length, and pit location within length,must be determined by user to fit maximumtruck length and rear overhang.• Provide at least one man door for fire escapenear rear of room, but not in rear wall becausesomeone entering during a test could be struckby a stone flung from a tire. Provide ample fireextinguishers at each door and near driver.• “Back-on, Drive-off” installation configurationpreferred
-
product
Water Brake Engine Dynamometers
DH Series
Ideal for gasoline engines and lower-horsepower diesel engines, Taylor Dynamometer’s DH Series Water Brake Engine Dynos can operate at speeds up to 5,500 rpm. Choose from three different models with capacities ranging from 270 to 805 hp (201 to 600 kW).
-
product
Heavy Duty Dynamometers
MD-250-HD
The MD-250-HD series dyno (SE/DE) was designed to be a performance dynamometer first with the added benefit of being able to test 2-wheel-drive heavy-duty vehicles such as truck, buses and commercial vehicles in addition to the standard car or light duty pick-up. The 250-HD is certified in the states of Colorado, Nevada and Utah for use in loaded-mode diesel smog testing programs because of its accuracy and reliability. No other dyno in its class offers more value or better in-house motor vehicle testing capabilities than the Mustang MD-250-HD. For starters, the MD-250-HD boasts a 1,500 horsepower measurement capacity at a top speed of 175 mph and a powerful air-cooled eddy current brake provides the MD-250-HD-SE with 900-hp worth ofloading capacity for steady state testing. Loading capacity can be increased to 1,500-hp via the optional DE model. The 250-HD can be upgraded to the 250-HD-SE-M via the addition of a 100 or 200 hp AC motor for transient testing of electric buses to measure range and regeneration or for emissions testing of IC engines. Do not be fooled by its compact size – the MD-250-HD is a serious dynamometer with serious tuning capabilities. The MD-250-HD uses a powerful eddy current power absorber, a frictionless, air-cooled braking device, to enable it to apply variable and steady state loading. A complete control and data acquisition system lets you design a wide range of tests or select from a host of pre-configured tests included with the standard system. The 250-HD’s four roller design makes setting up vehicles a snap – simply drive onto the 250-HD and let the tires settle in between the rollers. The 250-HD can be installed above-ground or below-ground, it’s your choice. The above-ground system utilizes an optional premium platform and ramp system with an above-ground restraint kit. The addition of an axle pull-down kit help keep the tires from slipping or trying to “climb out” of the rollers.
-
product
Towing Dynamometer
RS-40K
RS-40K towing dynamometer is designed for testing today’s DOT Vehicles (Classes 5 and 6) which include trucks and buses. The RS-40K is built with a heavy-duty steel frame, industrial axle and rides on an air ride suspension. The RS-40K is designed to maintain 40,000 Newtons of constant drawbar force and the ability to simulate an uphill slope of 25%. The dyno uses eddy current absorbers with special high temperature coils. The power is provided by an industrial generator. Testing is unlimited at lowspeeds.
-
product
Portable Wattmeter (Unity Power Factor)
Supreme Instrument Laboratories
The Principle of working is Electo-dynamometer type for Wattmeters. Portable dynamometer type single phase Single element Wattmeter housed in laminated wooden cabinet size 235 mm length x 200 mm width x 180 mm height, with detachable lid, black bakelite panel fitted with anti-parallax mirror scale, knife edge pointer, rubber footings, carrying handles, locking arrangements.
-
product
Portable Dynamometers
MD-150
The 150 series 2WD dynamometer is a compact offering that let’s you tune street cars without a large dedicated space. The 150 portable includes a pallet jack modification on one end of the frame and two bottle jacks on the other allow you to move this dyno in your shop. The portability kit lets you free up space as needed. The portable 150 is ideal for smaller shops, schools and outdoor events. There is no need to secure the unit to the ground – simply lower the unit onto the ground, hook up the light-weight composite ramps and start testing. For more information on the Portable 150 2WD series dynamometer please contact us today.
-
product
Small Engine Dynamometers
Toroidal-flow water-brake absorber (with 5" high-RPM rotor), electronic torque-arm transducer, engine load control, DYNOmite handheld data-acquisition computer, AC power supply, stainless-braided hoses, magnetic RPM sensor, data wiring harness, and protective carrying case.
-
product
Hydraulic Dynamometers
DT Dyno Series
DT type Hydraulic dynamometers are available with a large variety of power ranges. The standard range extends from 700 kW up to 4,500 kW. Due to their robust construction, compact assembly and the use of high quality materials, these dynamometers deliver their high running performance at extremely low maintenance costs.
-
product
Digital Controller
SPARC Controller
SPARC Brake is a digital controller optimized for Inertia Brake Dynamometers. As a member of the SPARC family of universal controllers, SPARC Brake is using a modular design to enable more flexible configurations to fulfill any specific test environment.SPARC Brake uses sophisticated control algorithms and provides superior and intelligent control of brake actuators with highest control accuracy to cover the wide range of brake test applications. From simple static brake testing to high dynamic simulation procedures, it is able to meet the highest demands for today’s and tomorrow’s brake test requirements, for example GM-TIP.
