Nordson Corporation
Nordson strives to be a vital, self-renewing global organization that produces and grows wealth for our employees, customers, shareholders and communities within the framework of ethical behavior and enlightened citizenship. Our employees are the engine that drives our progress in this pursuit.
- +1 440.892.1580
- 28601 Clemens Road
Westlake, Ohio 44145-4551
United States
-
product
Bondtester
4000 Plus Bondtester
4000Plus bondtester sets the industry standard in bondtesting offering unsurpassed accuracy and repeatability of data, providing complete confidence in results.
-
product
Acoustic Microscope
AMI P300
The FastLine P300 Acoustic Microscope is specifically designed for accelerated throughput, semiautomated screening of microelectronic devices on the manufacturing floor.
-
product
Inspection Tool
AMI DF2400
Automated In-line Inspection Tool for Defect-Free Production Without Sacrificing Throughput. The FACTS² delivers state-of-the-art, automated in-line inspection for quality and process control.
-
product
Jetting Valves
PICO Pµlse
Nordson EFD’s PICO Pµlse ® exchangeable, modular jet valve technology dispenses with industry-leading accuracy and speed to apply very precise, repeatable micro-deposits at 1000Hz continuous and bursts up to 1500Hz*.
-
product
Measurement Cartridge
DataSync™
The measurement cartridge is at the heart of every Bondtester and is critical to achieving accurate and consistent results.
-
product
Universal Offline AXI Systems
AXI XT-6 Series
The XT-series provides the advanced inspection capability of Nordson TEST & INSPECTION's inline system in a smaller footprint manual load/island of automation system. The platforms are designed for flexibility and ease of use for a wide variety of products requiring 2D and 2.5D automated X-ray inspection. The XT-6/XT-6A platform is a highly flexible automated X-ray inspection system with minimum footprint and a parallel-kinematic Hexaglide manipulation unit for extreme-angle off-axis image acquisition with high resolution. It is suitable for high-quality X-ray analysis of electronic assemblies and material analysis of parts that require flexible part manipulation with multiple inspection angles. For batch modes and volume inspection the XT-6 can be equipped with a single-sided conveyor setup and magazine load/unload station (XT-6A).
-
product
Acoustic Microscope
AMI D9650Z
The D9650Z incorporates the latest C-SAM technology with enhanced features to accommodate the testing of Power Modules as well as performing standard C-SAM operations. This new system configuration is optimized for inspection of heatsink bond integrity, thickness of bond layer and wire bond welds. Powered by our Sonolytics software platform with PolyGate technology, the D9650Z is ideal for failure analysis, process development and QC screening in low-volume production environments.
-
product
XRT Source Brighthawk
The BRIGHTHAWK NT100 is a performance-leading microfocus X-ray tube comprising proprietary technology to achieve a high brightness output. The tube consists of a LaB6 crystal source for generation of the electron beam, a magnetic beam steering system, and a tungsten target for X-ray photon emission. The components are mounted in a precision-engineering housing and held at ultra-low vacuum levels for long-life performance. Following on from the successful 3rd generation tube, this 4th generation of tube across a wide energy range from 30 kV to 160 kV is highly configurable through a software interface to the internal control board, which is connected via an optical interface (through an Ethernet converter).
-
product
Assure Component Counter
Assure & Assure Pro Intelligent Simple Fast Trustworthy Assure is the fastest, simplest and most reliable way to implement live component inventory management into your organization. Intelligent, simple, fast, and trustworthy, Assure enables you to increase productivity and minimize component shortage downtime. Assure™ Pro simplifies the reel counting workflow by automatically reading the reel’s barcode ID with an integrated camera.
-
product
Paragon™ Software
Its highly intuitive and configurable interface provides quick and easy access to advanced functionality, such as automatic GR&R calculation, built-in diagnostics, a unique database search engine wizard and superior reporting; increasing efficiency and providing 100% confidence in your bond testing results.
-
product
Disposable Square OptiMixers
Optimizing mix performance in a 20% shorter length than comparable square mixers, the OptiMixer™ allows users to get even closer to applications.
-
product
Disposable Square Turbo Mixers
Shorter than comparable spiral mixers, Nordson EFD’s square Turbo™ Mixers allow users to get closer to their application while reducing adhesive waste.
-
product
X-Ray Detector
XRT Detector Onyx
ONYX 1412-X is a performance-leading X-ray detector comprising a proprietary 2768 × 2376 active pixel sensor array of 50 × 50 µm pixels. This detector consists of a high-speed, low-noise, radiation-tolerant, 14 × 12 cm, 6.6M pixel CMOS image sensor, with a directly deposited high-resolution CsI scintillator on Fibre Optic Plate. The highly configurable sensor is accessed through a software interface, connected via a 10 GbE SFP+ hardware interface.
-
product
Fluid Pressure Booster
Nordson EFD Fluid Pressure Booster is designed to help move thick materials from a tank or cartridge to an EFD precision valve by boosting dispense pressure up to 100 bar.
-
product
2K Pistons
Pistons are inserted after the cartridge has been filled with two-component adhesives. Each design has its own unique way of removing the air between the piston and the adhesive, which is critical to dispense accuracy.
Parent
-
Nordson Corp.
Dispensing Equipment & Industrial Coating EquipmentCompany description.
Siblings
-
Nordson Adhesive Systems
We engineer, manufacture and market differentiated products used for dispensing adhesives, coatings, sealants, biomaterials and other materials; for fluid management; for test and inspection; and for UV curing and plasma surface treatment.
Siblings
-
YesTech, Inc.
YESTech, Inc., a division of Nordson Corporation, joining Nordson’s Advanced Technology Systems segment as a leading global provider of automated optical inspection and high-resolution x-ray inspection systems. The full line of inspection systems offers cost-effective, integrated yield enhancement solutions for the printed circuit board assembly, advanced semiconductor-packaging and hybrid assembly to EMS providers and electronics OEM's worldwide.
Siblings
-
Nordson Dage (Obsolete)
Control of the patented core technology of X-ray tube manufacture ensures that the high-resolution X-ray will detect, identify and measure even the smallest of features. DPI's high precision, state-of-the-art inspection equipment when joined with their sophisticated software offerings, ensure that the equipment is simple to use.
Siblings
-
Matrix Technologies GmbH (Obsolete)
Matrix Technologies GmbH is a global supplier of high-speed Automated Inline X-ray Inspection systems (AXI) and semi-automated X-ray Inspection systems to ensure the quality of critical electronic devices/components and electronic printed circuit boards manufactured by its customers.
Siblings
-
Matrix Technologies GmbH
Matrix Technologies GmbH, founded in 2004 and headquartered in Munich/Feldkirchen (Germany), is a market leading provider of Automated Inline X-ray Inspection systems (AXI & MXI for Electronics) that are used to control the manufacturing process and to ensure the quality of critical electronic devices, electronic printed circuit boards or fully assembled devices manufactured by its customers using surface mount technology (SMT). In addition, Matrix supplies automated and manual inspection solutions for Non-Destructive Testing (AXI for NDT) of other non-electronic materials such as casting or medical parts by using X-ray or Computed Tomography (“CT”) technology.
Siblings
-
Nordson Measurement & Control Solutions
We’re doing great things to transform manufacturing businesses around the world. Since our inception, we’ve always placed our focus on the customer and helping to drive outcomes that matter most. At Nordson Measurement & Control Solutions (formerly NDC Technologies) we’ve been delivering solutions for over 50 years, and our capabilities, depth of innovation experience and global reach have been growing ever since. We’ve played a dominant role in the food, bulk and tobacco; film extrusion and converting; cable and tubing; and metals industries. We know how to solve the toughest measurement and control challenges.
Siblings
-
CyberOptics Corporation
CyberOptics is a fully owned subsidiary of Nordson Corporation. The CyberOptics portfolio of high-precision sensors and systems for inspection and metrology, is part of the Nordson’s TEST & INSPECTION product line. CyberOptics solutions are used in SMT and semiconductor applications to improve customers’ yields, processes and productivity.
